Results 1 to 10 of 57
Thread: BL Touch and Makerfarm.
Hybrid View
-
03-23-2017, 08:20 PM #1
- Join Date
- Jul 2014
- Posts
- 305
Mine looks similar. I found a work around from the G92 command.
I changed the following while trying to find my Z-Offset:
#define Z_MIN_POS -10
#define MANUAL_Z_HOME_POS 0
This allows me to home using G28 and lower the Z axis by up to 10mm. After I found my offset, I changed these back to defaults. Now I am trying to figure out what the Bl Touch is doing as it is behaving erratically.
-
03-24-2017, 12:33 AM #2
Where did you get your BL-Touch? How much did you pay? There are a lot of counterfeit BL-Touches starting to show up and they don't behave like a BL-Touch. Some of them even need an inverted setting on the Z_MIN_ENDSTOP option. Search at GitHub.com/MarlinFirmware/Marlin for threads about BL-Touch and counterfeits. There is a huge amount of work that has been done to identify which 'clone' you have and how it should be set up.
But we do have the real BL-Touch probes working perfect!!!! It is the 'clones' that are having problems.
-
03-24-2017, 10:30 PM #3
- Join Date
- Jul 2014
- Posts
- 305
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials