Hey,

The links arent working, can you advise me on my printer settings for TPU filament?


Printer: Zortrax M200 Plus
Material: FLEX-based filament
Nozzle diameter: 0.4 mm
Layer: 0.19 mm
Infill: 30%
Fan speed: 100%
Seam: Normal
Outer contours: 0.00
Holes: 0.00
Surface layers Top: 8
Surface layers Bottom: 4
Max. wall thickness: 3.13 mm
First layer Density: 100%
First layer Print speed: 100%
First layer Flow ratio: 100%
First layer gap: 0.37 mm
Raft Enabled: Yes
Raft layers: 7
Platform-raft gap: 0.28 mm
Raft Density: 100%
Raft Print speed: 100%
Raft Flow ratio: 100%
Print speed: 50 mm/s
Extruder flow ratio: +0%
Top layer infill (%): 100
Bottom layer infill (%): 100
Extrusion temp.: 250
Platform temp.: 60
Retraction speed: 20
Retraction distance: 2.5
Support Density: 2.50 mm
Gap XY: 0.36

Please ignore the settings for raft, top and bottom layers... These are default settings my printer gave me for ''Flex'' based filaments, but the results are terrible.

Any help would be appreciated.

Thanks