Results 1 to 7 of 7
Thread: Staying flat once cooled
Threaded View
-
10-24-2016, 10:28 AM #4
similiar probably isn't the same.
(has a look) nope totally different.
Printbite does not flex. Does not need to.
I think you're going to have exactly the same problem with a flexible printbed. If you have to bend the plate to release the print, then with a very thin print it's going to get bent when you try to release it.
pei tape, sort of works - just not that well.
Try it, might work - but don't think it's anything like printbite.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials