Results 1 to 10 of 16
Thread: QIDI 1 surging fan
Threaded View
-
09-26-2016, 10:47 PM #7
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
Unfortunately, the QiDi printer does not respond to the fan/blower/aux speed setting other than to be either on or off. S3D does allow one to set the "fan speed" by layer, but my understanding is that there is no compatible "X3G" command to set the fan speed, so the QiDi just turns the fan on full, or off as a compromise.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials