Results 1 to 10 of 42
Hybrid View
-
09-13-2016, 08:02 PM #1
- Join Date
- Aug 2015
- Posts
- 256
My guess would be that the filament isn't freely coming of the spool.
But your temperature is also low for ABS. I'd suggest printing at 240.
-
10-06-2016, 11:55 AM #2
- Join Date
- Apr 2015
- Location
- Northern Ohio
- Posts
- 198
-
10-06-2016, 12:32 PM #3
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help