BUMP! It has been a while and I am done reworking my other 2 printers. I used to have 4 machines, but my monoprice mini v1 started acting up and I jumped on the chance to throw it away. This machine has been the workhorse that created all the parts for both of my other printers here: https://3dprintboard.com/showthread....-250mm-X-300mm . And here: https://3dprintboard.com/showthread....3-32bit-Rework . So now that my other 2 machines are up and running, it is time I brought this machine up to date. I will have a hand me down skr 1.4 turbo mainboard for this along with a tft35 v3.0 and also a magnetic flexible bed a clone from a mk3s printer. nice big 250x250 or so plate. In fact the specific bed I am applying to Printalicious is here: https://www.biqu.equipment/collectio...sa-i3-mk3-mk3s . And along with the 32 bit mainboard this machine will receive tmc2209 drivers that will run in uart. The parts have already been ordered, I have plenty of black PETG filament and 2 printers to make parts with. So let's get back to the fun part of life and start Reworking this Printer!