Results 1 to 5 of 5
Thread: Remove side panels on FFCP?
Hybrid View
-
08-30-2016, 01:51 PM #1
- Join Date
- Feb 2015
- Posts
- 91
I removed mine for printing PLA. Facing the machine I have no limit switch on the left, only on the right and that is mounted on the x-end carriage not on the panel. And the z-limit and y-limit switches are mounted on the back panel for my machine (FFCP Feb 2015). So the panels came off easily and it was suggested to do that on a yellow sticker on the machine.
-
08-30-2016, 02:47 PM #2
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
My limit switch mount is actually molded into the left panel. There are stickers on the side panels that talk about sliding windows open for PLA but there are no windows so I have no idea what that is about! I need to look more into how switches were mounted for previous version or another brand and get something working. So far not to big a deal having the left panel on.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help