Results 1 to 3 of 3
Thread: Odd PETG printing issues!
-
09-13-2016, 09:17 AM #1
- Join Date
- Sep 2016
- Posts
- 2
Odd PETG printing issues!
Im having some odd issues when printing with HATCHBOX PETG filament.
Im using a Flashforge Creator Pro, ReplicatorG, with Skeinforge(50) slicer.
My issue is that I am seeming to get varying results with (I think) the same settings. Settings right now are:
Infill: 25%
Layer Height: .2 mm
Num Shells: 1
Feedrate: 50 mm/s
Travel Feedrate: 90 mm/s
Nozzle temp: 240 c
Filament dia: 1.75 mm
Nozzle dia: .4 mm
Bed temp: 70 c
in the image is the different results im getting:
On the left its all good, on the right I dont know what the issue is.
Any thoughts?
P.S. I have been leveling my print bed before each print.Last edited by Ender; 09-13-2016 at 09:34 AM.
-
09-13-2016, 02:13 PM #2
- Join Date
- Sep 2014
- Location
- Brummen, Netherlands
- Posts
- 265
How much time between the two? And in which order?
-
09-16-2016, 10:56 AM #3
- Join Date
- Sep 2016
- Posts
- 2
The one on the left was first, the one on the right was done 2 hrs later
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help