Results 1 to 10 of 23
Hybrid View
-
08-05-2016, 07:15 AM #1
- Join Date
- Feb 2016
- Location
- UK
- Posts
- 10
Do a search in this forum for "focus" I seem to remember a couple of other members with the same issue. Perhaps they can respond.
-
08-05-2016, 01:28 PM #2
- Join Date
- Jul 2014
- Location
- UK
- Posts
- 124
This one .... http://3dprintboard.com/showthread.p...ighlight=Focus
-
08-05-2016, 02:38 PM #3
- Join Date
- Aug 2016
- Posts
- 21
-
08-05-2016, 02:54 PM #4
- Join Date
- Jul 2014
- Location
- UK
- Posts
- 124
-
08-05-2016, 02:31 PM #5
- Join Date
- Aug 2016
- Posts
- 21
I did that but unfortunately, there was no real answer. In fact someone else had a very similar issue as mine (the 2 cameras are not focusing on the same plane), was told that this is common and that free scan would take care of it, but it doesn't really help a lot.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help