Results 1 to 9 of 9
Thread: Shifted / Offset layers in print
Hybrid View
-
08-04-2016, 05:06 AM #1
It happens in about 1 out of 10 prints that I do.
I reassembled the print arms and checked the electronics - one of the heatsinks on the motor stepper drivers is missing so I am suspecting that this motor is skipping steps causing the offsets. I will put on some thermal paste and see if it resolves the issue.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help