Results 1 to 9 of 9
Thread: Shifted / Offset layers in print
Hybrid View
-
08-04-2016, 05:58 AM #1
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
If you have rate dependent thermal motor shutdown, the answer may be to drop the speed. If it's purely thermal, it should happen when the printer has been on for a while. In that case, you may have to much current headed into the motors. The little paste on heatsinks do very little for the drivers. You can get a little more benefit from a fan. Even there the benefit is less than you might think. The way the chips cool and the pc board layouts don't generally work very well together.
Bob
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials