Flashforge Creator Dual / Pro How to fix Dual Extruders dragging across prints.

[lycan]

Well.

Guess who decided to try and adjust nozzle alignment,

Lets just say I now know to totally disassemble the extruders but there was a difference between the two nozzle heights according to the calliper's.

It ended up taking me like 2.5 Hrs to pull it all apart ( still had filament in it..oops ) and get it back together again.

Its currently doing a print so be interesting to see how much I have upset things, will know in about 2Hrs

[lycan]

Excel,

Print completed with no drama`s and it appears I have eliminated the occasional scraping on the print from the un-used extruder.

For a change tonight I am actually going to turn off my printer and go to bed before 01:00 am compared to the last three nights being between 4 and 6 am.

Catchya All

[Geoff]

Excel,

Print completed with no drama`s and it appears I have eliminated the occasional scraping on the print from the un-used extruder.

For a change tonight I am actually going to turn off my printer and go to bed before 01:00 am compared to the last three nights being between 4 and 6 am.

Catchya All

I have never run my printer overnight, ever - I am just paranoid that's all so I have never had issues I did't know where they started - unless music was too loud and I didn't hear the click click click..

Worst thats happened is a spool got stuck and ended up pulling the thing so tight it snapped the spool holder.