Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 110

Hybrid View

  1. 09-28-2016, 11:46 AM #1
    Builder1
    Builder1 is offline
    Student
    Join Date
    Jul 2016
    Posts
    48
    Ok. I've uploaded the latest pics.
    With the laser set to 100%, the print was solid but still slightly rubbery. That actually made it a bit easier to get it off the mesh without totally destroying the bottom of the print. Just a little mangled instead :-)
    http://postimg.org/gallery/2g96zxbtg/
    Last edited by Builder1; 09-28-2016 at 12:06 PM.
    Reply With Quote Reply With Quote
  2. 09-29-2016, 01:08 AM #2
    CescoAiel
    CescoAiel is offline
    Technician
    Join Date
    Mar 2016
    Posts
    68
    Quote Originally Posted by Builder1 View Post
    Ok. I've uploaded the latest pics.
    With the laser set to 100%, the print was solid but still slightly rubbery. That actually made it a bit easier to get it off the mesh without totally destroying the bottom of the print. Just a little mangled instead :-)
    http://postimg.org/gallery/2g96zxbtg/
    Are those artifacts at the top?

    Looking good though! Too bad it never actually made it to market!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules