Results 1 to 10 of 31
Threaded View
-
06-15-2016, 11:39 AM #12
did you use gluestick ?
If it didn't stick to gluestick then you're calibration is off and needs to be tighter and use more glue.
I generally start with 3-4 comprehensive layers on a clean bed.
Bear in mind that you HAVE to calibrate wit the printer bed and nozzle pre-heated to the same settings you're going to print with. Otherwise you have no chance as everything changes when it heats up.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials