Results 1 to 10 of 10
Threaded View
-
08-16-2016, 01:22 AM #10
- Join Date
- Jun 2016
- Posts
- 21
You set it in your slicer program. In Simplify3d it's under "Edit Process Settings"->Temperature->"Heated Bed Platform"
You can have it change by layer if you want.
For ABS, I use 110 C for the first 10 layers, then 100 C for the next 10 layers, then 90 C til the end.
Since I have a glass bed, the part will pop right off when the bed gets below 40-50 C or so.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials