Results 1 to 10 of 40
Thread: PLA Suddenly Jamming Mid-Print
Hybrid View
-
09-11-2016, 03:45 PM #1
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
While you are poking around, I'd check the other settings as well. The Z axis looks a bit low. If the X and Y have the same motors as the extruder, they would need fixing as well.
Keep in mind that as you drop the current, the drive torque out of the motor will decrease. This will make the extruder more likely to jam.
Bob
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials