Results 11 to 20 of 30
Threaded View
-
05-31-2016, 04:54 PM #1
- Join Date
- Nov 2014
- Location
- Brevard, NC
- Posts
- 182
Replacing A4988 Drivers with DRV8825 on Arduino Mega 2560 + Ramps
I have been having a problem with my printer stopping in the middle of a print. The message I am getting with pronterface is that it has lost its connection. The heatbed & Hotend still stay at the same temperature, the printer just stops moving. I thought it might be a heat related problem with the electronics, so I had a small fan blowing on the arduino & it got thru a 40 minute print, but then lost its connection soon after the print ended. Since I have a spare Arduino mega on my CNC machine, thought I would substitute the drivers on that board to see if that fixed it, but they are DRV8825 & ones on my i3v are A4988. This web page says they are interchangeable http://reprap.org/wiki/A4988_vs_DRV8...tepper_drivers but it seems like I will need to adjust something in the firmware for them. I only have 3 DRV8825 drivers, so I am planning to change the X, Y & Z, but leave the A4988 for the extruder. I had this same problem with octoprint. I also swapped a usb cable & reseated all the connections. Anyway, does anyone know the settings I should change Marlin in the Configuration.h file or have a different suggestion? Looks like it might be this value that needs to change:
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,4000,841}
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials