Results 1 to 4 of 4
Thread: Capacitive sensor issue?
Hybrid View
-
05-28-2016, 03:54 PM #1
- Join Date
- Apr 2016
- Posts
- 30
I think I got it. The enstop was wired according to every picture Ive ever seen for the RAMPS board. Blue/Black/Blank. I hard wired the blue to ground and, have the black, sense wire to the first pin on the Z-MIN. Now all thats left is to get the firmware to understand there is no ZMAX and adjust the offset.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials