Results 1 to 10 of 73
Thread: Diy it?
Hybrid View
-
06-06-2016, 01:09 PM #1
- Join Date
- Mar 2016
- Posts
- 68
True, but it also increases the risk of UV light bleeding through in to deeper layers and curing deeper/more than intended...
So it's a balancing act really and their original goal of a less than $100 printer also set some limits...
-
06-06-2016, 01:15 PM #2
I was thinking about that and ideally I would think you would want a system to maintain the resin layer depth at the desired thickness of each layer and then have the laser intentionally cure it all the way through.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials