Diy it?

[Reonarudo]

It is all about inertia and inertial dampening...

Slower means the mirrors need to move less, and not as fast. For a magnetically activated *and* dampened system that certainly makes a difference.

Compare it to a car: can you make a tight turn better at 5MPH or 50MPH?

The galvo works with an electro-magnet, a well modelled system can take that into account and compensate the inertia. Am I wrong? Certainly for faster speeds it gets tricky but looking at the current state it just looks way too slow. If the resin curing speed is not the issue then at least a 2x speed increase would be great if possible.