Diy it?

[oninoshiko]

OK, the boards are in https://github.com/PeachyPrinter/peachyprinter-pcb it looks like every version rylan's done in a single directory. I understand why it's this way, but that's going to be a mess to work with. Also they are in eagle format. While it's probably small enough to work with the free (as in beer) version of eagle, I would just rather stick with what I've been using, the open-source Kicad. I've forked it in github (https://github.com/oninoshiko/peachyprinter-pcb), and am going to clean this down to just the board (rather then every version) and in Kicad's format. That should make things much easier for people looking at this for the first time. It will probably be monday before I'm done (sorry, I have to work).

Here we go, the physical bits are https://github.com/PeachyPrinter/PeachyPrinterHardware. Again I've forked it to https://github.com/oninoshiko/PeachyPrinterHardware and will be working on getting this to something designed for 3d printing rather then laser cutting. While laser-cutting is probably better for mass production, I think having one geared for 3d printing will be easier for most to get ahold of. In my experience more makerspaces have extrusion printers then have lasercutters.