Results 1 to 3 of 3
Hybrid View
-
05-04-2016, 02:25 PM #1
- Join Date
- May 2016
- Location
- Egenhofen, Germany
- Posts
- 2
Hi there,
I had/have the same issue with the build plate not being flat. I use a 2mm glass plate with small metal clips to hold it in place. I only use hairspray on the glass (Strong hold) and it works great as long as you are sure to pre-heat the plate properly.
IMG_1745.jpg
Another thing to watch out for; the Thermistor on the heat plate is wrong. The use a 66K thermistor instead of the 100K the controller expects. Replaced mine with a 100K SMD and works like a charm now.Last edited by max; 05-04-2016 at 02:34 PM.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials