Results 1 to 10 of 11
Thread: Is there a "best" glass bed
Hybrid View
-
04-25-2016, 06:20 PM #1
- Join Date
- Oct 2014
- Posts
- 93
forget all about glass bed just get a printinz zebra flexi build plate, it is the best build plate out there, since buying mine i have not used anything else. it is flawless in the quality requires 0 heat for pla and around 60 for abs, i have had 0 failed prints (except for if it needs a wipe down with rubbing alcahol) it really is the best thing out there.
-
04-25-2016, 07:48 PM #2
- Join Date
- Apr 2016
- Posts
- 15
are these the same thing? http://www.amazon.com/400mm-205mm-Si.../dp/B007PPEW52
I already order the glass...
-
04-26-2016, 03:50 PM #3
- Join Date
- Aug 2015
- Posts
- 256
Yes, that's the exact same thing. I cut it into five 1.5 inch squares (one for each corner of the plate and one in the middle)--it's a waste to cover the entire glass and that makes it harder to remove.
It will raise the glass by about 0.5mm, so you'll want to add a 0.5mm extra spacer on top of the spacer that you use with your glass plate (I just used a few layers of tape).
-
05-01-2016, 10:30 PM #4
- Join Date
- Apr 2016
- Posts
- 15
-
05-03-2016, 06:38 PM #5
- Join Date
- Aug 2015
- Posts
- 256
-
05-03-2016, 06:56 PM #6
- Join Date
- Apr 2016
- Posts
- 15
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials