MakerFarm Pegasus 8' Printer Problem

[flatty_420]

I just realized the Pegasus doesn't have a Greg's Wade extruder, so my earlier question on whether the large gear is ever reversing won't make sense to you. I guess what you could do is lightly pinch the filament above the extruder and feel whether the filament is ever being pushed upwards. .

There is a bearing on the front of the extruder (mounted opposite the hobbed gear) that you can watch and see very easily what the extruder motor is doing.

I'm leaving further support to the thread to others with Pegasus experience - I don't know how sensitive the Pegasus is to retraction extruder motor speed, etc. Good luck.

Sorry, can't help there as I have not touched those settings on mine and know nothing about them.