Results 1 to 5 of 5
Thread: Measuring tolerances in STL
Hybrid View
-
03-25-2016, 09:32 AM #1
I printed the model and 0.4 is an ok tolerance so that the joint moves freely. I use 0.2 tolerance for interconnecting non-moving parts
I printed the model and 0.4 is an ok tolerance so that the joint moves freely. I use 0.2 tolerance for interconnecting non-moving parts
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials