Results 1 to 7 of 7
Threaded View
-
04-05-2016, 12:24 PM #7
- Join Date
- Feb 2016
- Posts
- 14
Your mighty board may be missing the MOS-FET (PSMN7R0-30YL) for that connector. If so, you will need to solder one in to allow the fan control to work.
Edit: Sorry, I missed that it is working for you when you start it manually. For what it's worth, I use S3D with this mod and it works fine. I did not need to change any gcode, but I did have to tell it to start the fan on layer 2 in the process config.Last edited by err404; 04-05-2016 at 12:43 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion