Quote Originally Posted by Geoff View Post
Oh sorry, I did not see the bulge before.

Can I assume you printed that hook on it's side, and the other object standing up tall? if that is the case it looks just like my flashforge prints most of the time. If you are using simplify 3D im pretty sure you can change the starting point of every layer.

If the starting position is "aligned" it will start the layer always from the same spot as you know, which can create that seem - but it's odd yours started doing randomly - it was ok before yeah?

mine has done this from day 1, so I use other programs to slice like makerware (it makes pretty good X3G) or a few others, but to be honest I only use simplify3D for my kossel and prusa now. I've never gotten better prints out of S3D so I stuck with what worked best for me.
Yes, the bag handle was printed standing up and the coat hangers on one side.
For the handle the point for the Z scar is where it's supposed to be. That bulge is not on the exact opposite face, it seems random.
For the coat hanger two bulges emerged on the two small faces.
Here are more photos of the effect:
https://drive.google.com/file/d/0B0w...ew?usp=sharing
https://drive.google.com/file/d/0B0w...ew?usp=sharing
https://drive.google.com/file/d/0B0w...ew?usp=sharing

I will try to use other slicer, even though FFCP recommends S3D...