Open Sourcing the Pegasus

[TBone]

Hi doobie, I just got a pegasus touch a couple weeks ago that was not used anymore. I would be interested in running it with your open source firmware to try different settings for the resins. With stock machine resins keeps staying uncured.

Could you tell me if you have any update since the commit from February 2017?

I have the BBB (ethernet not wireless) running, but as meryan00 pointed compile laser calls for a z-axis.p that is not present. I am not very familiar with pasm, but if you could point me toward a solution I could do some work and push it to the repo if I can help.

Looking next lines, dbg_zaxis.c does not seem to exist either.

pasm -b zaxis.p ../bin/zaxis
gcc -o ../bin/dbg_zaxis dbg_zaxis.c -lprussdrv -lm

I would love to make this thing work!

[doobie]

When I had time for this project not many people were interested, my printer isn't up and running now, but I have fixed some of the code as well as some others were providing updates/cleaning things up. That particular fix should be corrected, so if you pull the code again you should get the fix.

Hi doobie, I just got a pegasus touch a couple weeks ago that was not used anymore. I would be interested in running it with your open source firmware to try different settings for the resins. With stock machine resins keeps staying uncured.

Could you tell me if you have any update since the commit from February 2017?

I have the BBB (ethernet not wireless) running, but as meryan00 pointed compile laser calls for a z-axis.p that is not present. I am not very familiar with pasm, but if you could point me toward a solution I could do some work and push it to the repo if I can help.

Looking next lines, dbg_zaxis.c does not seem to exist either.

pasm -b zaxis.p ../bin/zaxis
gcc -o ../bin/dbg_zaxis dbg_zaxis.c -lprussdrv -lm

I would love to make this thing work!

[Dgug77]

When I had time for this project not many people were interested, my printer isn't up and running now, but I have fixed some of the code as well as some others were providing updates/cleaning things up. That particular fix should be corrected, so if you pull the code again you should get the fix.

So turned it on after 3 years this thing an fsl3d real crap. And it started this message then turns off and does it again until it just goes black screen.
Any luck on the custom program?
Otherwise its a $5k paperweight! Fsl3d has no parts wont give up where to get them and going to charge $100 to "try" to reflash.
Dont even know if the board is good!