Results 1 to 10 of 139
Thread: Open Sourcing the Pegasus
Hybrid View
-
09-03-2016, 12:05 PM #1
- Join Date
- Jan 2016
- Posts
- 31
It's been slow going on the mechanical side of things too, but I'm making headway. Got the one point leveling build plate working well now.
I actually built a custom FDM printer just to prototype parts for the Pegasus... that put things on hold for months.
-
09-03-2016, 12:15 PM #2
- Join Date
- Jun 2014
- Posts
- 885
Is your one-point leveling build plate similar to those that use a ball joint at the clamp location? From what I'd guess, one would drop the build plate into the vat with the clamp loose, then snug it down after making contact.
-
09-03-2016, 12:36 PM #3
- Join Date
- Jan 2016
- Posts
- 31
correct, I have pictures in the next thread: http://3dprintboard.com/showthread.p...ll=1#post96607
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help