Results 1 to 10 of 11
Thread: Hot End Scraping Bed
Threaded View
-
01-25-2016, 12:09 PM #1
- Join Date
- Jan 2016
- Posts
- 5
Hot End Scraping Bed
Hello everyone ! I recently decided to try out 3D printing as a hobby. Not knowing anything about 3D printing, I decided to buy a cheap printer to use until I gained enough experience in printing to justify buying a professional grade printer. I currently own a Printrbot Play 1505. I've been trying to print the test print ( a 3mm block) but every time I start the print, my Hot End dives into the bed. I run the bed leveling wizard, and my print starts out fine, but about 3 lines into the brim, the Hot End begins to sink into the bed. I did some research online and made the recommended tweaks, but that ended up making things worse. I really don't know how to troubleshoot or solve my current issue. Here is a video of my issue, and some pictures of my settings. If anyone could help me get on the right path, it would be greatly appreciated.
My Printer: http://www.amazon.com/gp/product/B01...f_rd_i=desktop
Here is a video of my problem.
Here are my current settings.
Basic Settings
3D Printer Basic Settings.jpg
Advanced Settings
3D Printer Advanced Settings.jpg
Expert Settings
3D Printer Expert Settings.jpg
Machine Settings
3D Printer Machine Settings.jpg
Start GCode
3D Printer Start GCode.jpgLast edited by NyxieSticks; 01-25-2016 at 03:46 PM.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help