Results 1 to 4 of 4
-
01-23-2016, 12:21 AM #1
- Join Date
- Sep 2014
- Posts
- 19
Flashforge stops printing suddenly
Hi, i hope someone can give me some advices.
I have a creator pro, have been printing very good for months, but these days it just stops during printing; it goes to the main menu, i print from SD; try different Cards; i have read some info, i remove the bottom cover (overheat) ; i read about stepper motor wire broken ( i moved any visible wire to try to reproduce the defect, no luck) any advices? ??? Thanks in advance
Just saw when it happened, seems to be aprox in te same z position and close to the right edge; i heard a "click" then it restarted.
Any clue?Last edited by userksh; 01-23-2016 at 12:37 AM. Reason: New info
-
01-23-2016, 02:38 AM #2
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Broken wire or faulty power supply. Move the head manually and see if you can make it reset.
-
01-23-2016, 09:33 AM #3
I was having the same thing happen to me but it was around the middle of my bed. It was the X axis wire on the stepper motor. The wire looks fine but is broken some where. I replaced it and it is doing fine now.
-
01-23-2016, 07:05 PM #4
- Join Date
- Sep 2014
- Posts
- 19
Thanks, ill replace it and check it.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials