Results 1 to 10 of 48
Thread: Nightmare start
Threaded View
-
01-21-2016, 07:42 AM #7
- Join Date
- Jan 2016
- Posts
- 26
Yes definitely 0.2mm as I didn't change that from the default in Makerware... I'll up that 0.33mm put the temp down a bit to 205 degrees and give another attempt once clean..
Thanks a lot guys and I'll keep you informed how it goes!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion