Results 1 to 10 of 12
Hybrid View
-
01-25-2016, 08:34 PM #1
I do all kinds of fun things with the LEDs with Simplify3D. You can also, edit the .gcode file. The lights are near the top with a M146 command, set it to "M146 R0 B0 G0" or add that line near the top of the file. Or like said before, unplug the lights.
-
01-26-2016, 09:59 AM #2
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion