Results 1 to 7 of 7
Thread: Assembly video needs work
Hybrid View
-
01-17-2016, 02:47 PM #1
- Join Date
- Sep 2013
- Location
- San Diego
- Posts
- 210
To make an even level mark, all you need is a thick book to set on a flat surface. Lay a marker flat on the book with the end sticking out and spin the bottle on the cap, marking the bottle as you spin. Should be a nice straight line to cut.
Not sure about the crank arm, where did you see it?
-
01-17-2016, 06:55 PM #2
- Join Date
- Apr 2014
- Posts
- 88
-
01-18-2016, 01:45 PM #3
- Join Date
- Sep 2013
- Location
- San Diego
- Posts
- 210
Sure enough. You can even see that Nathan made the crank arm. It it for a pulley system. I am not sure, but I suspect you will cut out a disk from cardboard and poke the crank arm through. Then run some fishing line around both disks and crank to spin your object. Does that make sense? Only thing I can think of for the fishing line he mentions.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials