Results 1 to 8 of 8
Hybrid View
-
01-10-2016, 12:56 PM #1
- Join Date
- Jan 2016
- Posts
- 2
Did not cut thru any wire. Spatula touched the two exposed soldered terminals of the Platform Heater at the back of the platform. I saw a small spark. And now the heater switches on whenever the machine is powered. Don't need to give any pre-heat or other command.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials