Results 1 to 10 of 11
Hybrid View
-
01-12-2016, 08:29 AM #1
- Join Date
- Jun 2014
- Location
- 3D Printer Tellus
- Posts
- 83
If you have not touched the firmware there should not be any problem with PID, check the thermocouple or other mechanical thing that may interupt.
-
01-12-2016, 08:33 AM #2
- Join Date
- Jul 2015
- Posts
- 7
What do you mean mechanical thing? I am currently recieving the M999 error. I was attempting to print and it start ok then the temp dropped quickly to 145c and i quickly canceled print. As the printers hotend was cooling that error popped up. Im really stumped as to what to do. I'm gonna try new firmware now. If that doesn't work im not really sure.
Last edited by zarnold16; 01-12-2016 at 10:03 AM. Reason: adding info that just occured
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials