Okay, i removed that thermal thing so there is only plastic, i applied hairspray, heated bed to 100, nozzle to 240, levelled my bed, tried to print, then i saw that the filament is just making a huge blub on the nozzle, so i decraised the distance, it didnt work, i then raised the distance, same again, didnt work, so now i'm at the point where the printer cant even print the first layer, because its always making a blub on my nozzle. My personal opinion is that my extruder fan is working at 100% and its making the filament dry so fast. i put my hand under the fan and i can feel the wind the fan makes, and if i extrude some material i can clearly see that the fan can blow my material a bit. Any tips?