Results 1 to 10 of 13
Threaded View
-
01-04-2016, 09:35 PM #7
- Join Date
- Feb 2015
- Location
- Pinehurst North Carolina
- Posts
- 9
Hi Kris,
I believe that the problem is with the stl model. I use Simplify3D and have made a number of similar wheels with no problems. When I loaded and sliced your stl and the repaired stl I had the same problem namely the flat disk on the top. I did a cross section on the stl model and found it to have a lot of oddly intersecting thin-walled surfaces which I suspect is the source of the problem.
Chris
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials