Itty Bitty Double FLEX V2

[clough42]

Here is a double extruder print I did last week.

IMG_2550.jpgIMG_2554.jpg

I printed this with the Itty Bitty Double FLEX v2, two 1.75mm E3Dv6 hot ends and my custom milled bolts. Layer height is .2mm, print speed was 80mm/s. It was sliced with Simplify3D with the ooze shield. This was mostly an experiment to see how well the ooze shield would protect a print with lots of crazy curves. There isn't much it can do when you're printing white, and the purple nozzle is rubbing on a white part of the print, so there are a few imperfections, but overall I'm very pleased with the result. I did no temperature tuning. Both nozzles were running at 255C, so there's definitely opportunity to reduce ooze with temps, but this was just a test of the ooze shield.

You can see that the top edges aren't quite filled in. This was also printed with eSteps at 610. Something like 625 would probably be much better.

[hernejj]

My parts kit arrives tonight I am planning on staying with Marlin 1.1.0 RC5. Does anyone happen to have a config I can start with? I tried diffing mine with the default config that Clough42 provides in his preconfigured Marlin download but there have been so many changes to Marlin it is impossible to see what is related to a dual extruder setup vs just cleanup/additions to the config file.

[clough42]

My parts kit arrives tonight I am planning on staying with Marlin 1.1.0 RC5. Does anyone happen to have a config I can start with? I tried diffing mine with the default config that Clough42 provides in his preconfigured Marlin download but there have been so many changes to Marlin it is impossible to see what is related to a dual extruder setup vs just cleanup/additions to the config file.

Sorry for the very late reply. I didn't get a notification, or if I did, I didn't see it.

Here's what I'm using on my 12" double right now: https://github.com/clough42/Marlin/b...onfiguration.h

I think that was for RC4, but it should be a lot closer than the stuff currently on my web site.