Results 1 to 10 of 12
Thread: Any tips in Bridging with PETG?
Threaded View
-
12-12-2015, 06:52 PM #12
- Join Date
- Feb 2015
- Posts
- 91
I stayed at 240 because less than that and I can pull the layers apart on a FFCP, but doing the bridges *really* slowly (20mm/s at 0.2 mm layer height) and with a print cooling fan going. I've heard 240 and above is bad for the interior Teflon so I have the Micro-Swiss all metal hot end upgrade, but haven't installed it yet. Waiting for a free moment to take the hot end apart.
WP_20151212_16_47_13_Pro.jpg
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials