Results 1 to 2 of 2
-
03-24-2016, 04:57 PM #1
- Join Date
- Mar 2016
- Posts
- 2
Reprap Prusa I3 problem with "waiting for user input"
Hi everyone, I have a problem with my 3d printer. At about layer number 40, suddenly the nozzle stops printing then moves in the z axis a couple of steps and then goes to the maximun distance in the x axis, and displays the message "waiting for user input".
It wasn't like this before, I printed so many prints before this stated to happen, don't know what is causing it, and ruined many of my prints because after I press to resume the print, the nozzle missaligns with the already printed part.
Reprap Prusa I3. http://www.ebay.com/itm/Newest-DIY-3...item2a5bc2e135
Cura v 15.04.3.
With prints lower than 40 layers I don't experience that issue. Tried with my own models done in blender, and also with models downloaded from thingivers.com and have the same issue
Any thoughts?Last edited by rene; 03-24-2016 at 05:13 PM.
-
03-24-2016, 11:11 PM #2
- Join Date
- Mar 2016
- Posts
- 2
Solved, I updated cura version, and prints larger than 40 layers print without that issue
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help