Results 1 to 4 of 4
Threaded View
-
11-25-2015, 08:23 AM #1
- Join Date
- Nov 2014
- Posts
- 32
Quality issue. Vibration/ringing?
I've been working on fine tuning my i3v 10in and have the e steps configured, everything's tight, and the hexagon is at about 200C. Unfortunately, I'm getting the following artifacts when printing and was hoping you guys might know what's up.
https://goo.gl/photos/xHZnWcDU7rD82SXTA
As you can see, some areas are super smooth while others have what looks like there are vibrations.
Thanks,
Matt
PS There's also severe z-scarring on the other side. I assume this can be fixed via retracting on layer change, but I haven't tried that yet. Here's a pic of that https://goo.gl/photos/drgo5Kfb3hSwZC6H9Last edited by mattanonymous; 11-25-2015 at 08:25 AM. Reason: added pic of other side
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery