Results 1 to 10 of 14
Thread: New Marlin firmware?
Hybrid View
-
11-25-2015, 08:42 AM #1
Did you see this in the BeckDac Configuration.h file?
Code:// set the max number of grid points per dimension // The G29 command defaults to 3 if nothing is specified. But setting the number of probed // points higher is very useful when getting a Bed Topology Report (G29 n 5 T) #define AUTO_BED_LEVELING_GRID_POINTS 5
-
11-25-2015, 08:54 AM #2
- Join Date
- Jan 2015
- Posts
- 68
Yes I did, mine was set to 3 but when i tried 4 or 5 instead it does not change the number of points sampled. I tried clearing my eeprom before uploading my changed firmware with no success. I also tried running an M502 then M500 to re-write the eeprom settings with the new firmware and i still only get a 3x3 grid (9 point sample).
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials