Results 1 to 10 of 95
Thread: 12" I3V Build
Hybrid View
-
03-30-2016, 10:42 AM #1
- Join Date
- Nov 2015
- Posts
- 73
Learnt the hard way couple days ago that you need to pay attention to where you run the USB cable from the Rumba. Too close to a motor wire and you'll get some very unhappy and frustrating results until you get it routed away from the motor wires.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion