Results 1 to 10 of 95
Thread: 12" I3V Build
Hybrid View
-
03-05-2016, 03:37 PM #1
- Join Date
- Nov 2015
- Posts
- 73
IMG_20160305_154049118.jpg
Fan shroud printed quite well. Once I figured out I could remove one of the hotend mounting screws and pivot the fan to the back and then reinstall it I was able to mount the shroud without any extensions. This is the longer of clough42s two shrouds. I'll find out how it works later tonight or tomorrow.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help