Results 1 to 10 of 18
Thread: new to 3D printing, help please
Hybrid View
-
01-24-2016, 11:28 AM #1
The buildtak is pretty but it doesn't really work well at all, I've found. The blue painter's tape gives better results but still pulls up (often lifting the tape off the buildtak!).
IMG_9563.JPG
-
01-26-2016, 01:17 PM #2
- Join Date
- Dec 2015
- Posts
- 10
Printing with PLA or ABS?
Maybe try cranking the heat down a bit see if that helps with the blue tape pulling up.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help