MK-1 Extruder Settings

[Davo]

I don't know which X00 microns profiles you're referring to.

The Z.2 S1800 profile is for 0.2mm (200 micron) layers, 35% honeycomb infill, 30mm/sec movement (hence S1800 - 1800 mm/min).

Let me know how it goes.

[rd_3d]

Hi Davo,

It definitely helped using those settings. I still get some warping on the edges and with smaller feature I still get lots of material at the seams. So I believe that would mean fine-tuning the prime and unprime steps. I am currently using prime=450 and unprime=500.

Please let me know if you suggest a different amount for these. I have attached some pictures. The blue was the print quality I was experiencing before changing the settings. The red is after the settings change. Thanks for your help!

Sincerely,
RD_3D

20151030_172616.jpg20151031_172237-2.jpg20151031_195121.jpg20151031_195126.jpg20151102_113558.jpg