Results 1 to 10 of 11
Thread: MK-1 Extruder Settings
Threaded View
-
11-02-2015, 10:37 AM #7
- Join Date
- Oct 2015
- Posts
- 11
Hi Davo,
It definitely helped using those settings. I still get some warping on the edges and with smaller feature I still get lots of material at the seams. So I believe that would mean fine-tuning the prime and unprime steps. I am currently using prime=450 and unprime=500.
Please let me know if you suggest a different amount for these. I have attached some pictures. The blue was the print quality I was experiencing before changing the settings. The red is after the settings change. Thanks for your help!
Sincerely,
RD_3D
20151030_172616.jpg20151031_172237-2.jpg20151031_195121.jpg20151031_195126.jpg20151102_113558.jpg
Please explain to me how to...
Today, 07:24 AM in 3D Printer Parts, Filament & Materials