Although I am aware that there aren't many people here with the Pegasus hopefully someone with an i3 has seen this issue. The first print I did on the printer, on the left, came out pretty well. I have since switched from ponterface to Repetier use and am using sli3er inside of that. What could be causing the issue on the right with the banding look? It isn't just popping out in one axis those outcroppings go all the way around the print.

I'm printing pretty slow too, maybe 35mm/s. My nozzle should be set right at .4mm, temp at around 195C in PLA.

print.jpg