Results 1 to 10 of 14
Hybrid View
-
10-25-2015, 12:50 PM #1
- Join Date
- Oct 2015
- Posts
- 5
Brand New FlashForge Creator Pro - Missing bag A screws to install extruder
Please help! I'm missing the bag containing 2 screws from nylon bag A (http://i.imgur.com/I7PDV1N.jpg?1). It's pretty much step one. I'd really like to get this up and running ASAP and will go to my local hardware store to replace them if I know what type of screws they are. Please, Please, Please can someone help me. I'm so close, and yet so far.
-
10-25-2015, 01:27 PM #2
I think those 2 screws are the same as used in CTC printer.
If so, they are 3mm screws, 15mm thread length.
Note: there may be some screws in Bag-B that will fitLast edited by EagleSeven; 10-25-2015 at 01:44 PM.
-
10-25-2015, 02:02 PM #3
- Join Date
- Oct 2015
- Posts
- 5
But, then I'll need bag B screws lol. But I'll use them when I go to the store for reference. Thanks!!!
-
10-25-2015, 02:40 PM #4
-
10-25-2015, 02:57 PM #5
-
10-25-2015, 03:04 PM #6
-
10-25-2015, 06:22 PM #7
- Join Date
- Oct 2015
- Posts
- 5
Lowe's had Hillman Machine Screws M3-.50 x 10, but they don't seem to be working. Am I missing something?
-
10-26-2015, 07:41 AM #8
Those are probably Too Short,
I think the 10mm is the Overall length and you need some with about 15mm thread length,
Overall length includes the Head also,
So, you need some with overall length about 18mm, I think.
The .50 number is the thread Pitch, or shape of treads.
and .5 is the most common M3 pitch.Last edited by EagleSeven; 10-26-2015 at 07:47 AM.
-
10-26-2015, 07:24 AM #9
what does the '-.50' mean ?
All the nuts and bolts on my creator are m3.
I've bought spares from my local hardware store and off amazon. No issues - but never seen the '-.50' before.
-
10-26-2015, 07:55 AM #10
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery